Gull Posts, 180mm X 4mm X100

SRP :
BIR035
  • For use against small gulls e.g Black Headed Gulls.
  • Installed by knocking them into Anchor Rivets (e.g. BIR010).
  • Posts to be positionsed at 3m intervals along the ledge.
  • These posts are used for the leading edge of a ledge.
  • If multiple rows are needed, the rows need to be 125mm apart.
  • For gulls, stronger wire is required (NET087) or (NET085).
  • The springs used should be the stronger Micro Springs (BIR040).
  • 4mm diameter Stainless Steel
In Stock
Pack Quantity PACK OF 100